EN H-Shaped Steel Heb And Hea Beam Welded H Steel
PRODUCT PRODUCTION PROCESS
These designations signify different types of IPE beams based on their dimensions and properties:
- HEA (IPN) beams: These are IPE beams with a particularly wide flange width and flange thickness, making them suitable for use in heavy-duty structural applications.
- HEB (IPB) beams: These are IPE beams with a medium flange width and flange thickness, commonly used in construction for various structural purposes.
- HEM beams: These are IPE beams with a particularly deep and narrow flange, providing increased strength and load-carrying capacity.
These beams are designed to provide specific structural capabilities, and the choice of which type to use depends on the requirements of a particular construction project.
PRODUCT SIZE
| Designation | Unt Weight kg/m) |
Standard Secional imension mm |
Sectional Ama (cm² |
|||||
| W | H | B | 1 | 2 | r | A | ||
| HE28 | AA | 61.3 | 264.0 | 280.0 | 7.0 | 10.0 | 24.0 | 78.02 |
| A | 76.4 | 270.0 | 280.0 | 80 | 13.0 | 24.0 | 97.26 | |
| B | 103 | 280.0 | 280.0 | 10.5 | 18.0 | 24.0 | 131.4 | |
| M | 189 | 310.0 | 288.0 | 18.5 | 33.0 | 24.0 | 240.2 | |
| HE300 | AA | 69.8 | 283.0 | 300.0 | 7.5 | 10.5 | 27.0 | 88.91 |
| A | 88.3 | 200.0 | 300.0 | 85 | 14.0 | 27.0 | 112.5 | |
| B | 117 | 300.0 | 300.0 | 11.0 | 19.0 | 27.0 | 149.1 | |
| M | 238 | 340.0 | 310.0 | 21.0 | 39.0 | 27.0 | 303.1 | |
| HE320 | AA | 74.3 | 301.0 | 300.0 | 80 | 11.0 | 27.0 | 94.58 |
| A | 97.7 | 310.0 | 300.0 | 9.0 | 15.5 | 27.0 | 124.4 | |
| B | 127 | 320.0 | 300.0 | 11.5 | 20.5 | 27.0 | 161.3 | |
| M | 245 | 359.0 | 309.0 | 21.0 | 40.0 | 27.0 | 312.0 | |
| HE340 | AA | 78.9 | 320.0 | 300.0 | 85 | 11.5 | 27.0 | 100.5 |
| A | 105 | 330.0 | 300.0 | 9.5 | 16.5 | 27.0 | 133.5 | |
| B | 134 | 340.0 | 300.0 | 12.0 | 21.5 | 27.0 | 170.9 | |
| M | 248 | 377.0 | 309.0 | 21.0 | 40.0 | 27.0 | 315.8 | |
| HE360 | AA | 83.7 | 339.0 | 300.0 | 9.0 | t2.0 | 27.0 | 106.6 |
| A | 112 | 350.0 | 300.0 | 10.0 | 17.5 | 27.0 | 142.8 | |
| B | 142 | 360.0 | 300.0 | 12.5 | 22.5 | 27.0 | 180.6 | |
| M | 250 | 395.0 | 308.0 | 21.0 | 40.0 | 27.0 | 318.8 | |
| HE400 | AA | 92.4 | 3780 | 300.0 | 9.5 | 13.0 | 27.0 | 117.7 |
| A | 125 | 390.0 | 300.0 | 11.0 | 19.0 | 27.0 | 159.0 | |
| B | 155 | 400.0 | 300.0 | 13.5 | 24.0 | 27.0 | 197.8 | |
| M | 256 | 4320 | 307.0 | 21.0 | 40.0 | 27.0 | 325.8 | |
| HE450 | AA | 99.8 | 425.0 | 300.0 | 10.0 | 13.5 | 27.0 | 127.1 |
| A | 140 | 440.0 | 300.0 | 11.5 | 21.0 | 27.0 | 178.0 | |
| B | 171 | 450.0 | 300.0 | 14.0 | 26.0 | 27.0 | 218.0 | |
| M | 263 | 4780 | 307.0 | 21.0 | 40.0 | 27.0 | 335.4 | |
| Designatio | Unit Weight kg/m) |
Standad Sectional Dimersion (mm) |
Sectiona Area (cm²) |
|||||
| W | H | B | 1 | 2 | r | A | ||
| HE50 | AA | 107 | 472.0 | 300.0 | 10.5 | 14.0 | 27.0 | 136.9 |
| A | 155 | 490.0 | 300.0 | t2.0 | 23.0 | 27.0 | 197.5 | |
| B | 187 | 500.0 | 300.0 | 14.5 | 28.0 | 27.0 | 238.6 | |
| M | 270 | 524.0 | 306.0 | 21.0 | 40.0 | 27.0 | 344.3 | |
| HE550 | AA | t20 | 522.0 | 300.0 | 11.5 | 15.0 | 27.0 | 152.8 |
| A | 166 | 540.0 | 300.0 | t2.5 | 24.0 | 27.0 | 211.8 | |
| B | 199 | 550.0 | 300.0 | 15.0 | 29.0 | 27.0 | 254.1 | |
| M | 278 | 572.0 | 306.0 | 21.0 | 40.0 | 27.0 | 354.4 | |
| HE60 | AA | t29 | 571.0 | 300.0 | t2.0 | 15.5 | 27.0 | 164.1 |
| A | 178 | 500.0 | 300.0 | 13.0 | 25.0 | 27.0 | 226.5 | |
| B | 212 | 600.0 | 300.0 | 15.5 | 30.0 | 27.0 | 270.0 | |
| M | 286 | 620.0 | 305.0 | 21.0 | 40.0 | 27.0 | 363.7 | |
| HE650 | AA | 138 | 620.0 | 300.0 | t2.5 | 16.0 | 27.0 | 175.8 |
| A | 190 | 640.0 | 300.0 | t3.5 | 26.0 | 27.0 | 241.6 | |
| B | 225 | 660.0 | 300.0 | 16.0 | 31.0 | 27.0 | 286.3 | |
| M | 293 | 668.0 | 305.0 | 21.0 | 40.0 | 27.0 | 373.7 | |
| HE700 | AA | 150 | 670.0 | 300.0 | 13.0 | 17.0 | 27.0 | 190.9 |
| A | 204 | 600.0 | 300.0 | 14.5 | 27.0 | 27.0 | 260.5 | |
| B | 241 | 700.0 | 300.0 | 17.0 | 32.0 | 27.0 | 306.4 | |
| M | 301 | 716.0 | 304.0 | 21.0 | 40.0 | 27.0 | 383.0 | |
| HE800 | AA | 172 | 770.0 | 300.0 | 14.0 | 18.0 | 30.0 | 218.5 |
| A | 224 | 790.0 | 300.0 | 15.0 | 28.0 | 30.0 | 285.8 | |
| B | 262 | 800.0 | 300.0 | 17.5 | 33.0 | 30.0 | 334.2 | |
| M | 317 | 814.0 | 303.0 | 21.0 | 40.0 | 30.0 | 404.3 | |
| HE800 | AA | 198 | 870.0 | 300.0 | 15.0 | 20.0 | 30.0 | 252.2 |
| A | 252 | 800.0 | 300.0 | 16.0 | 30.0 | 30.0 | 320.5 | |
| B | 291 | 900.0 | 300.0 | 18.5 | 35.0 | 30.0 | 371.3 | |
| M | 333 | 910.0 | 302.0 | 21.0 | 40.0 | 30.0 | 423.6 | |
| HEB1000 | AA | 222 | 970.0 | 300.0 | 16.0 | 21.0 | 30.0 | 282.2 |
| A | 272 | 0.0 | 300.0 | 16.5 | 31.0 | 30.0 | 346.8 | |
| B | 314 | 1000.0 | 300.0 | 19.0 | 36.0 | 30.0 | 400.0 | |
| M | 349 | 1008 | 302.0 | 21.0 | 40.0 | 30.0 | 444.2 | |
FEATURES
HEA, HEB, and HEM beams are European standard IPE (I-beam) sections used in construction and structural engineering. Here are some of the key features of each type:
Wide flange width and flange thickness
Suitable for heavy-duty structural applications
Provides good load-carrying capacity and bending resistance
HEB (IPB) beams:
Medium flange width and flange thickness
Versatile and commonly used in construction for various structural purposes
Offers a balance of strength and weight
HEM beams:
Particularly deep and narrow flange
Provides increased strength and load-carrying capacity
Designed for heavy-duty and high-stress applications
These beams are designed to meet specific structural requirements and are selected based on the intended use and load-bearing needs of a building or structure.
PRODUCT INSPECTION
The requirements for H-shaped steel inspection mainly include the following aspects:
Appearance quality: The appearance quality of H-shaped steel should comply with relevant standards and ordering requirements. The surface should be smooth and flat, without obvious dents, scratches, rust and other defects.
Geometric dimensions: The length, width, height, web thickness, flange thickness and other dimensions of H-shaped steel should comply with relevant standards and ordering requirements.
Curvature: The curvature of H-shaped steel should comply with relevant standards and ordering requirements. It can be detected by measuring whether the planes at both ends of the H-shaped steel are parallel or using a bending meter.
Twist: The twist of H-shaped steel should comply with relevant standards and ordering requirements. It can be detected by measuring whether the side of the H-shaped steel is vertical or with a twist meter.
Weight deviation: The weight of H-shaped steel should comply with relevant standards and ordering requirements. Weight deviations can be detected by weighing.
Chemical composition: If H-shaped steel needs to be welded or otherwise processed, its chemical composition should comply with relevant standards and ordering requirements.
Mechanical properties: The mechanical properties of H-shaped steel should comply with relevant standards and ordering requirements, including tensile strength, yield point, elongation and other indicators.
Non-destructive testing: If H-shaped steel requires non-destructive testing, it should be tested in accordance with relevant standards and ordering requirements to ensure that its internal quality is good.
Packaging and marking: The packaging and marking of H-shaped steel should comply with relevant standards and ordering requirements to facilitate transportation and storage.
In short, the above requirements should be fully considered when inspecting H-shaped steel to ensure that its quality meets relevant standards and ordering requirements, and to provide users with the best H-shaped steel products.
APPLICATION
HEA, HEB, and HEM beams have a wide range of applications in the construction and structural engineering industry. Some common uses include:
- Building Construction: These beams are often used in the construction of commercial and industrial buildings to provide structural support for floors, roofs, and other load-bearing elements.
- Bridge Construction: They are utilized in the construction of bridges to support roadway decks and other structural components.
- Industrial Structures: HEA, HEB, and HEM beams are commonly used in the construction of industrial facilities such as warehouses, manufacturing plants, and storage facilities.
- Structural Frameworks: They are used to create structural frameworks for large buildings and infrastructure projects, providing support for walls, cladding, and other structural elements.
- Equipment Support: These beams are used to support heavy machinery and equipment in various industrial settings.
- Infrastructure Projects: HEA, HEB, and HEM beams are also utilized in the construction of infrastructure projects such as tunnels, airports, and power plants.
Overall, these beams are crucial in providing robust and reliable structural support in a wide variety of construction and engineering projects. Their versatility, strength, and load-bearing capacity make them essential components in modern building and infrastructure design.
PACKAGING AND SHIPPING
Packaging and protection:
Packaging plays a vital role in safeguarding the quality of ASTM A36 H beam steel during transportation and storage. The material should be securely bundled, using high-strength straps or bands to prevent movement and potential damage. Additionally, measures should be taken to protect the steel from exposure to moisture, dust, and other environmental factors. Wrapping the bundles in weather-resistant material, such as plastic or waterproof fabric, helps protect against corrosion and rust.
Loading and securing for transportation:
Loading and securing the packaged steel onto the transport vehicle should be done carefully. Employing suitable lifting equipment, such as forklifts or cranes, ensures a safe and efficient process. The beams should be evenly distributed and properly aligned to prevent any structural damage during transportation. Once loaded, securing the cargo with adequate restraints, such as ropes or chains, guarantees stability and prevents shifting.
FAQ
1.How can I get a quotation from you ?
You can leave us message, and we will reply every message in time.
2.Will you delivery the goods on time?
Yes,we promise to provide best quality products and delivery on time. Honesty is our company's tenet.
3.Can I get samples before order ?
Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.
4.What is your payment terms?
Our usual payment term is 30% deposit, and rest against B/L. EXW, FOB,CFR, CIF.
5.Do you accept the third party inspection?
Yes absolutely we accept.
6.How do we trust your company?
We specialise in steel business for years as golden supplier, headquarter locates in Tianjin province, welcome to investigate in any ways, by all means.
