Cold U Type Steel Sheet Pile /12m Steel Sheet Piles / Carbon Steel Sheet Piles

Short Description:

U-shaped steel sheet pile: WR series steel sheet pile section structure design is reasonable, advanced forming technology, so that the steel sheet pile product section modulus and weight ratio continues to improve, so that it can obtain good economic benefits in the application, broaden the application field of cold formed steel sheet pile.


  • Steel Grade: S275,S355,S390,S430,SY295,SY390,ASTM A690
  • Production standard: EN10248,EN10249,JIS5528,JIS5523,ASTM
  • Certificates: ISO9001,ISO14001,ISO18001,CE FPC
  • Payment Term: 30%TT+70%
  • Contact Us: +86 15320016383
  • : chinaroyalsteel@163.com
  • Product Detail

    Product Tags

    The production process of cold-formed U-shaped steel sheet piles usually includes the following steps:

    Raw material preparation: Prepare the raw materials for U-shaped steel sheet piles, usually hot-rolled steel plates or cold-rolled steel plates.

    Plate rolling: The raw  is fed into the plate rolling machine for plate rolling processing to shape it into a U-shaped cross section.

    Cold bending: The rolled steel plate is cold-bent, and the steel plate is formed by a cold bending machine or bending machine to make it a U-shaped cross-section.

    Cutting: Use cutting equipment to cut the sheet piles to the appropriate size based on the required length.

    Welding (if necessary): Perform the necessary welding process on cold-formed U-shaped steel sheet piles to ensure that the connection is firm and meets relevant standards.

    Surface treatment: Surface treatment is performed on the finished product, such as rust removal, painting, etc., to improve the anti-corrosion performance of the product.

    Inspection and Quality Control: Inspection of finished products to ensure they meet the requirements of relevant standards and specifications.

    Packaging and Shipping: Pack the finished product and arrange for shipping to the customer or job site.

    These steps may vary according to different production processes and equipment, but are usually the basic steps of the production process of cold-formed U-shaped steel sheet piles.

    Section Modulus Range
    ​1100-5000cm3/m

    Width Range (single)
    ​580-800mm

    Thickness Range
    ​5-16mm

    Production Standards
    ​BS EN 10249 Part 1 & 2

    ​Steel Grades​
    SY295, SY390 & S355GP for Type II to Type VIL

    S240GP, S275GP, S355GP & S390 for VL506A to VL606K

    Length
    27.0m maximum

    Standard Stock Lengths of 6m, 9m, 12m, 15m

    Delivery Options
    Single or Pairs

    Pairs either loose, welded or crimped

    Lifting Hole

    By container (11.8m or less) or Break Bulk

    Corrosion Protection Coatings

    Cold-formed U-shaped steel sheet pile (3)
    Cold-formed U-shaped steel sheet pile

    PRODUCT SIZE

    *Send the email to chinaroyalsteel@163.com to get a quotation for your projects

    Steel Grade
    S275,S355,S390,S430,SY295,SY390,ASTM A690
    standard
    EN10248,EN10249,JIS5528,JIS5523,ASTM,GB/T 20933-2014
    Delivery time
    10~20 Days
    Certificates
    ISO9001,ISO14001,ISO18001,CE FPC
    Length
    6m-24m,9m,12m,15m,18m are common export length
    Type
    Processing Service
    Punching, Cutting
    Technique
    Hot Rolled,Cold Rolled
    Dimensions
    PU400x100 PU400x125 PU400x150 PU400x170 PU500x200 PU500x225 PU600x130 PU600x180 PU600x210
    Interlock types
    Larssen locks,cold rolled interlock,hot rolled interlock
    Length
    1-12 meter or customized length

    Application

    river bank,harbour pier,municipal facilities,urban tube corridor,seismic reinforcement,bridge pier,bearing foundation,underground
    garage,foundation pit cofferdam,road widening retaining wall and temporary works.

    FEATURES

    The characteristics of  are as follows
    After understanding, if you are also interested in steel sheet pile please feel free to contact us

    u=3480512383,1819291266&fm=253&fmt=auto&app=138&f=JPEG
    u=600319523,3158295545&fm=253&fmt=auto&app=138&f=JPEG

    APPLICATION

    Cold-formed U-shaped steel sheet pile (4)

    1)  are rich in specifications and models.

    2) According to the European standard design and production, the structural form is symmetrical, conducive to repeated use, and the same as hot rolling in repeated use.

    3) The length can be customized according to customer requirements, which brings convenience to the construction and reduces the cost.

    4) Due to the convenience of production, it can be customized before leaving the factory when it is used with combined piles.

    5) The production design and production cycle is short, and the performance of steel sheet piles can be determined according to customer requirements.

    PACKAGING AND SHIPPING

    The soil excavation of foundation pit should follow the principle of stratification, balance and timely, and the stratification height should correspond to the vertical spacing of the inner support, and 0 under the inner support. 5 meters deep is the stratification limit. When mechanical excavation is used, the bottom of the pit shall be manually cleared 20cm above the design elevation and shall not be overdug. After the excavation is in place, the pipeline should be constructed in time, and the exposure time of the foundation pit is strictly prohibited.

    When a customer wishes to visit a product, the following steps can usually be arranged:

    Make an appointment to visit: Customers can contact the manufacturer or sales representative in advance to make an appointment for the time and place to visit the product.

    Arrange a guided tour: Arrange professionals or sales representatives as tour guides to show customers the production process, technology and quality control process of the product.

    Display products: During the visit, show products at different stages to customers so that customers can understand the production process and quality standards of the products.

    Answer questions: During the visit, customers may have various questions, and the tour guide or sales representative should answer them patiently and provide relevant technical and quality information.

    Provide samples: If possible, product samples can be provided to customers so that customers can more intuitively understand the quality and characteristics of the product.

    Follow-up: After the visit, promptly follow up on customer feedback and needs to provide customers with further support and services.

    Cold-formed U-shaped steel sheet pile (5)
    Cold-formed U-shaped steel sheet pile (6)

    COMPANY STRENGTH

    Made in China, first-class service, cutting-edge quality, world-renowned
    1. Scale effect: Our company has a large supply chain and a large steel factory, achieving scale effects in transportation and procurement, and becoming a steel company that integrates production and services
    2. Product diversity: Product diversity, any steel you want can be purchased from us, mainly engaged in steel structures, steel rails, steel sheet piles, photovoltaic brackets, channel steel, silicon steel coils and other products, which makes it more flexible Choose the desired product type to meet different needs.
    3. Stable supply: Having a more stable production line and supply chain can provide more reliable supply. This is especially important for buyers who require large quantities of steel.
    4. Brand influence: Have higher brand influence and larger market
    5. Service: A large steel company that integrates customization, transportation and production
    6. Price competitiveness: reasonable price

    *Send the email to chinaroyalsteel@163.com to get a quotation for your projects

    Rail (10)

    COMPANY STRENGTH

    Cold-formed U-shaped steel sheet pile (8)

    FAQ

    1.How can I get a quotation from you ?
    You can leave us message, and we will reply every message in time.

    2.Will you delivery the goods on time?
    Yes,we promise to provide best quality products and delivery on time. Honesty is our company's tenet.

    3.Can I get samples before order ?
    Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.

    4.What is your payment terms?
    Our usual payment term is 30% deposit, and rest against B/L. EXW, FOB,CFR, CIF.

    5.Do you accept the third party inspection?
    Yes absolutely we accept.

    6.How do we trust your company?
    We specialise in steel business for years as golden supplier, headquarter locates in Tianjin province, welcome to investigate in any ways, by all means.


  • Previous:
  • Next:

  • Write your message here and send it to us