Products
-
Factory Custom ASTM A36 Hot Rolled 400 500 30 ft Carbon Steel Weld H Beam For Industry
ASTM H-Shaped Steel are essential components in structural projects, providing stability, strength, and durability. One of the most widely used options in the construction industry is the Astm A36 H Beam Steel, renowned for its exceptional quality and versatility.
-
Galvanized Steel Zam310 S350GD Unistrut 41 X 21mm Light Duty Slotted Channel
Hot-dip galvanized steel slotted support channel is a support system used in architectural, electrical and mechanical installations. It is made of steel that has been hot-dip galvanized for corrosion resistance. The slotted design allows for easy attachment of various components such as pipes, conduits and cable trays using bolts and nuts. This type of post channel is commonly used in industrial and commercial settings for framing, equipment installation, and to create support structures. Hot-dip galvanized coating provides durability and rust protection, making it suitable for both indoor and outdoor applications.
-
High Quality High Strength Supply Slotted Galvanized Unistrut HDG Gi Strut C Channel Steel
Hot-dip galvanized C-shaped steel (hot dip galvanized C-channel) is a cold-bent thin-walled steel section with a “C”-shaped cross-section that has been treated with a hot-dip galvanizing process. It has excellent corrosion resistance and is widely used in scenarios such as building structure support, mechanical support, and photovoltaic support. It can efficiently transfer loads and adapt to various installation requirements.
-
Hot Dipped Galvanized Steel Slotted Strut C Channel
Hot-dip galvanized steel slotted support channel is a support system used in architectural, electrical and mechanical installations. It is made of steel that has been hot-dip galvanized for corrosion resistance. The slotted design allows for easy attachment of various components such as pipes, conduits and cable trays using bolts and nuts. This type of post channel is commonly used in industrial and commercial settings for framing, equipment installation, and to create support structures. Hot-dip galvanized coating provides durability and rust protection, making it suitable for both indoor and outdoor applications.
-
HEA HEB HEM H Beam H Shaped Steel Beam – European Wide Flange Beams
HEA, HEB, and HEM are designations for European standard IPE (I-beam) sections.
-
IPE European Wide Flange Beams
An IPE beam, also known as an I-beam or universal beam, is a long steel beam with a cross-section similar to the letter “I”. It is primarily used in architectural and structural engineering applications to provide support and stability to buildings and other structures. IPE beams are designed to resist bending and support heavy loads, making them a versatile choice for a variety of construction projects.Commonly used in building frames, industrial structures, bridges
-
UPN (UNP) EUROPEAN STANDARD U CHANNELS
Current table represents European standard U (UPN, UNP) channels, UPN steel profile (UPN beam), specifications, properties, dimensions. Manufactured according to standards :
DIN 1026-1: 2000, NF A 45-202: 1986
EN 10279: 2000 (Tolerances)
EN 10163-3: 2004, class C, subclass 1 (Surface condition)
STN 42 5550
ČTN 42 5550
TDP: STN 42 0135 -
ASTM Equal Angle Steel Galvanized Iron L / V Shape Mild Steel Angle Bar
ASTM Equal Angle Steel commonly known as angle iron, is a long steel with two sides perpendicular to each other. There are equal angle steel and unequal angle steel.The width of two sides of an equal angle steel is equal. The specification is expressed in mm of side width × side width × side thickness. Such as “∟ 30 × 30 × 3″, that is to say, equal angle steel with side width of 30mm and side thickness of 3mm. It can also be expressed by model. The model is the centimeter of the side width, such as ∟ 3 × 3. The model does not represent the dimensions of different edge thicknesses in the same model, so the edge width and edge thickness dimensions of angle steel shall be filled in completely in the contract and other documents to avoid using the model alone. The specification of hot rolled equal leg angle steel is 2 × 3-20 × 3.
-
DIN I-Shaped Steel Low Carbon H Beam IPE IPN Q195 Q235 Q345B Profile Steel I Beam
The IPN beam, also known as an IPE beam, is a type of European standard I-beam with a specifically designed cross-section that includes parallel flanges and a slope on the inner flange surfaces. These beams are commonly used in construction and structural engineering for their strength and versatility in providing support for various structures such as buildings, bridges, and industrial facilities. They are known for their high load-bearing capacity and are widely utilized in a variety of applications due to their reliable performance.
-
High Quality Bronze Coil
It has high strength, elasticity and wear resistance, and has high corrosion resistance in the atmosphere, fresh water, sea water and certain acids. It can be welded, gas welded, not easy to braze, and can withstand pressure well in cold or hot conditions. Processing, cannot be quenched and tempered.
-
Factory Premium Quality and Low Price Perforated Stainless Steel Plate for Decoration 1.4mm Hole Stainless Steel Punched Plate
Steel processed parts is on the basis of steel raw materials, according to the product drawings provided by customers, customized and manufactured product production molds for customers according to the required product specifications, dimensions, materials, special surface treatment, and other information of the processed parts. Precision, high-quality, and high-tech production is carried out according to customer requirements. If there are no design drawings, it’s okay. Our product designers will design according to the customer’s needs.
-
Pipe and Tube Bending Manufacturer Carbon Steel Handrail Fabrication
Steel processed parts is on the basis of steel raw materials, according to the product drawings provided by customers, customized and manufactured product production molds for customers according to the required product specifications, dimensions, materials, special surface treatment, and other information of the processed parts. Precision, high-quality, and high-tech production is carried out according to customer requirements. If there are no design drawings, it’s okay. Our product designers will design according to the customer’s needs.