Products
-
ASTM Equal Angle Steel Carbon Steel Mild Steel Corner Angle Bar
Angle steel so the edge width and edge thickness dimensions of angle steel shall be filled in completely in the contract and other documents to avoid using the model alone. The specification of hot rolled equal leg angle steel is 2 × 3-20 × 3.
-
Cheap Prime Quality ASTM Equal Angle Steel Iron Mild Steel Angle Bar
ASTM Equal Angle Steel is a long steel with two sides perpendicular to each other. There are equal angle steel and unequal angle steel.The width of two sides of an equal angle steel is equal. The specification is expressed in mm of side width × side width × side thickness. Such as “∟ 30 × 30 × 3″, that is to say, equal angle steel with side width of 30mm and side thickness of 3mm. It can also be expressed by model. The model is the centimeter of the side width, such as ∟ 3 × 3. The model does not represent the dimensions of different edge thicknesses in the same model, so the edge width and edge thickness dimensions of angle steel shall be filled in completely in the contract and other documents to avoid using the model alone. The specification of hot rolled equal leg angle steel is 2 × 3-20 × 3.
-
ASTM A36 Angle Bar Low Carbon Steel
ASTM Equal Angle Steel commonly known as angle iron, is a long steel with two sides perpendicular to each other. There are equal angle steel and unequal angle steel.The width of two sides of an equal angle steel is equal. The specification is expressed in mm of side width × side width × side thickness. Such as “∟ 30 × 30 × 3″, that is to say, equal angle steel with side width of 30mm and side thickness of 3mm. It can also be expressed by model. The model is the centimeter of the side width, such as ∟ 3 × 3. The model does not represent the dimensions of different edge thicknesses in the same model, so the edge width and edge thickness dimensions of angle steel shall be filled in completely in the contract and other documents to avoid using the model alone. The specification of hot rolled equal leg angle steel is 2 × 3-20 × 3.
-
EN I-Shaped Steel Heavy Duty I-Beam Crossmembers for Truck
EN I-Shaped Steel also known as an IPE beam, is a type of European standard I-beam with a specifically designed cross-section that includes parallel flanges and a slope on the inner flange surfaces. These beams are commonly used in construction and structural engineering for their strength and versatility in providing support for various structures such as buildings, bridges, and industrial facilities. They are known for their high load-bearing capacity and are widely utilized in a variety of applications due to their reliable performance.
-
ISCOR Steel Rail/Steel Rail/Railway Rail/Heat Treated Rail
ISCOR Steel Rail has high strength. Because it is made of high-strength steel, its hardness is very high (compared to ordinary steel bars), and it can withstand greater pressure and impact loads without being damaged; it also has good toughness: that is, it has a higher Strong ability to resist repeated impacts. Therefore, the probability of the wheel set falling off can be greatly reduced and the driving safety factor can be improved.
-
Railroad Train ISCOR Steel Rail Steel Heavy Rail
ISCOR Steel Rail operation efficiency: The use of steel rails can reduce the resistance and noise of trains, improve railway operation efficiency, speed up trains, shorten transportation time, and improve service quality.
-
JIS Standard Steel Rail/Heavy Rail/Crane Rail Factory Price Best Quality Rails Scrap Rail Track Metal Railway Steel Rail
JIS Standard Steel Rail can not only carry the operation of trains, but also realize automatic control of trains through track circuits. Track circuit is a system that realizes automatic train control and signal transmission by connecting tracks with circuits. When a train runs on a track circuit rail, it compresses the circuit on the track, thereby activating the circuit. Through the signaling equipment connected to the circuit, functions such as train speed and position detection, train safety control, and train position reporting are realized.
-
JIS Standard Steel Rail/Steel Rail/Railway Rail/Heat Treated Rail
JIS Standard Steel Rail important load-bearing structure when trains are running on railways. They can bear the weight of trains and transmit them to the roadbed. They also need to guide trains and reduce friction on sleepers. Therefore, the load-bearing capacity of rails is one of the important considerations.
-
Railroad Train JIS Standard Steel Rail Heavy Rail
JIS Standard Steel Rail are an important load-bearing structure when trains are running on railways. They can bear the weight of trains and transmit them to the roadbed. They also need to guide trains and reduce friction on sleepers. Therefore, the load-bearing capacity of rails is one of the important considerations.
-
ISCOR Steel Rail Railroad Quality Rails Track Metal Railway Steel Rail
With the development of ISCOR Steel Rail transportation technology, rails are constantly being improved and improved, playing an important role in the efficiency and safety of railway transportation.
-
AREMA Standard Steel Rail/Steel Rail/Railway Rail/Heat Treated Rail
The track was first composed of AREMA Standard Steel Rail. Later, cast iron rails were used, and then I-shaped rails were developed. In the 1980s, the standard gauge used by most railways in the world (see Railway Track Geometry) was 1435 mm (4 ft. 8(1/2) inches). Those that are narrower than this are called narrow gauge railways, and those that are wider than this are called broad gauge railways (see Railway Engineering).
-
AREMA Standard Steel Rail Trolley Hoisting And Lifting Heavy Train Track Mine Rail
First of all, AREMA Standard Steel Rail has high strength and hardness. Because the railway traffic system needs to withstand the huge load and the impact of high-speed trains, the strength of the rail steel must be able to meet these requirements.