Favorable price and good quality Chinese supplier H-shaped steel
PRODUCT PRODUCTION PROCESS
The production process of external standard H-shaped steel usually includes the following main steps:
Raw material preparation: The raw material for producing H-shaped steel is usually steel billet. The steel billet needs to be cleaned and heated for subsequent processing and forming.
Hot rolling processing: The preheated steel billet is sent to the hot rolling mill for processing. In the hot rolling mill, the steel billet is rolled by multiple rollers and gradually formed into the cross-sectional shape of H-shaped steel.
Cold working (optional): In some cases, in order to improve the accuracy and surface quality of H-shaped steel, the hot-rolled H-shaped steel will also be cold processed, such as cold rolling, drawing, etc.
Cutting and finishing: After rolling and cold working, H-shaped steel needs to be cut and finished according to the customer's requirements to meet specific size and length requirements.
Surface treatment: Clean and anti-rust treatment of H-shaped steel to ensure the surface quality and corrosion resistance of the product.
Inspection and packaging: Conduct quality inspection on the produced H-shaped steel, including inspection of appearance quality, dimensional accuracy, mechanical properties, etc. After passing the test, it will be packed and ready to be sent to the customer.
PRODUCT SIZE
| Designation | Unt Weight kg/m) |
Standard Secional imension mm |
Sectional Ama (cm² |
|||||
| W | H | B | 1 | 2 | r | A | ||
| HE28 | AA | 61.3 | 264.0 | 280.0 | 7.0 | 10.0 | 24.0 | 78.02 |
| A | 76.4 | 270.0 | 280.0 | 80 | 13.0 | 24.0 | 97.26 | |
| B | 103 | 280.0 | 280.0 | 10.5 | 18.0 | 24.0 | 131.4 | |
| M | 189 | 310.0 | 288.0 | 18.5 | 33.0 | 24.0 | 240.2 | |
| HE300 | AA | 69.8 | 283.0 | 300.0 | 7.5 | 10.5 | 27.0 | 88.91 |
| A | 88.3 | 200.0 | 300.0 | 85 | 14.0 | 27.0 | 112.5 | |
| B | 117 | 300.0 | 300.0 | 11.0 | 19.0 | 27.0 | 149.1 | |
| M | 238 | 340.0 | 310.0 | 21.0 | 39.0 | 27.0 | 303.1 | |
| HE320 | AA | 74.3 | 301.0 | 300.0 | 80 | 11.0 | 27.0 | 94.58 |
| A | 97.7 | 310.0 | 300.0 | 9.0 | 15.5 | 27.0 | 124.4 | |
| B | 127 | 320.0 | 300.0 | 11.5 | 20.5 | 27.0 | 161.3 | |
| M | 245 | 359.0 | 309.0 | 21.0 | 40.0 | 27.0 | 312.0 | |
| HE340 | AA | 78.9 | 320.0 | 300.0 | 85 | 11.5 | 27.0 | 100.5 |
| A | 105 | 330.0 | 300.0 | 9.5 | 16.5 | 27.0 | 133.5 | |
| B | 134 | 340.0 | 300.0 | 12.0 | 21.5 | 27.0 | 170.9 | |
| M | 248 | 377.0 | 309.0 | 21.0 | 40.0 | 27.0 | 315.8 | |
| HE360 | AA | 83.7 | 339.0 | 300.0 | 9.0 | t2.0 | 27.0 | 106.6 |
| A | 112 | 350.0 | 300.0 | 10.0 | 17.5 | 27.0 | 142.8 | |
| B | 142 | 360.0 | 300.0 | 12.5 | 22.5 | 27.0 | 180.6 | |
| M | 250 | 395.0 | 308.0 | 21.0 | 40.0 | 27.0 | 318.8 | |
| HE400 | AA | 92.4 | 3780 | 300.0 | 9.5 | 13.0 | 27.0 | 117.7 |
| A | 125 | 390.0 | 300.0 | 11.0 | 19.0 | 27.0 | 159.0 | |
| B | 155 | 400.0 | 300.0 | 13.5 | 24.0 | 27.0 | 197.8 | |
| M | 256 | 4320 | 307.0 | 21.0 | 40.0 | 27.0 | 325.8 | |
| HE450 | AA | 99.8 | 425.0 | 300.0 | 10.0 | 13.5 | 27.0 | 127.1 |
| A | 140 | 440.0 | 300.0 | 11.5 | 21.0 | 27.0 | 178.0 | |
| B | 171 | 450.0 | 300.0 | 14.0 | 26.0 | 27.0 | 218.0 | |
| M | 263 | 4780 | 307.0 | 21.0 | 40.0 | 27.0 | 335.4 | |
| Designatio | Unit Weight kg/m) |
Standad Sectional Dimersion (mm) |
Sectiona Area (cm²) |
|||||
| W | H | B | 1 | 2 | r | A | ||
| HE50 | AA | 107 | 472.0 | 300.0 | 10.5 | 14.0 | 27.0 | 136.9 |
| A | 155 | 490.0 | 300.0 | t2.0 | 23.0 | 27.0 | 197.5 | |
| B | 187 | 500.0 | 300.0 | 14.5 | 28.0 | 27.0 | 238.6 | |
| M | 270 | 524.0 | 306.0 | 21.0 | 40.0 | 27.0 | 344.3 | |
| HE550 | AA | t20 | 522.0 | 300.0 | 11.5 | 15.0 | 27.0 | 152.8 |
| A | 166 | 540.0 | 300.0 | t2.5 | 24.0 | 27.0 | 211.8 | |
| B | 199 | 550.0 | 300.0 | 15.0 | 29.0 | 27.0 | 254.1 | |
| M | 278 | 572.0 | 306.0 | 21.0 | 40.0 | 27.0 | 354.4 | |
| HE60 | AA | t29 | 571.0 | 300.0 | t2.0 | 15.5 | 27.0 | 164.1 |
| A | 178 | 500.0 | 300.0 | 13.0 | 25.0 | 27.0 | 226.5 | |
| B | 212 | 600.0 | 300.0 | 15.5 | 30.0 | 27.0 | 270.0 | |
| M | 286 | 620.0 | 305.0 | 21.0 | 40.0 | 27.0 | 363.7 | |
| HE650 | AA | 138 | 620.0 | 300.0 | t2.5 | 16.0 | 27.0 | 175.8 |
| A | 190 | 640.0 | 300.0 | t3.5 | 26.0 | 27.0 | 241.6 | |
| B | 225 | 660.0 | 300.0 | 16.0 | 31.0 | 27.0 | 286.3 | |
| M | 293 | 668.0 | 305.0 | 21.0 | 40.0 | 27.0 | 373.7 | |
| HE700 | AA | 150 | 670.0 | 300.0 | 13.0 | 17.0 | 27.0 | 190.9 |
| A | 204 | 600.0 | 300.0 | 14.5 | 27.0 | 27.0 | 260.5 | |
| B | 241 | 700.0 | 300.0 | 17.0 | 32.0 | 27.0 | 306.4 | |
| M | 301 | 716.0 | 304.0 | 21.0 | 40.0 | 27.0 | 383.0 | |
| HE800 | AA | 172 | 770.0 | 300.0 | 14.0 | 18.0 | 30.0 | 218.5 |
| A | 224 | 790.0 | 300.0 | 15.0 | 28.0 | 30.0 | 285.8 | |
| B | 262 | 800.0 | 300.0 | 17.5 | 33.0 | 30.0 | 334.2 | |
| M | 317 | 814.0 | 303.0 | 21.0 | 40.0 | 30.0 | 404.3 | |
| HE800 | AA | 198 | 870.0 | 300.0 | 15.0 | 20.0 | 30.0 | 252.2 |
| A | 252 | 800.0 | 300.0 | 16.0 | 30.0 | 30.0 | 320.5 | |
| B | 291 | 900.0 | 300.0 | 18.5 | 35.0 | 30.0 | 371.3 | |
| M | 333 | 910.0 | 302.0 | 21.0 | 40.0 | 30.0 | 423.6 | |
| HEB1000 | AA | 222 | 970.0 | 300.0 | 16.0 | 21.0 | 30.0 | 282.2 |
| A | 272 | 0.0 | 300.0 | 16.5 | 31.0 | 30.0 | 346.8 | |
| B | 314 | 1000.0 | 300.0 | 19.0 | 36.0 | 30.0 | 400.0 | |
| M | 349 | 1008 | 302.0 | 21.0 | 40.0 | 30.0 | 444.2 | |
EN H-Shaped Steel
Grade: EN10034:1997 EN10163-3：2004
Specification:HEA HEB and HEM
Standard: EN
FEATURES
High strength: The cross-sectional shape design of H-shaped steel gives it high bending strength and load-bearing capacity, making it suitable for large-span structures and heavy-load situations.
Good stability: The cross-sectional shape of H-shaped steel gives it good stability when subjected to pressure and tension, which is beneficial to the stability and safety of the structure.
Convenient construction: The design of H-shaped steel makes it easy to connect and install during the construction process, which is beneficial to the construction progress and efficiency of the project.
High resource utilization rate: The design of H-shaped steel can make full use of the performance of steel, reduce the waste of materials, and is conducive to resource conservation and environmental protection.
Wide scope of application: H-shaped steel is suitable for various building structures, bridges, machinery manufacturing and other fields, and has broad application prospects.
In general, external standard H-shaped steel has the characteristics of high strength, good stability, and convenient construction. It is an important structural steel material and is widely used in various engineering fields.
PRODUCT INSPECTION
The requirements for H-shaped steel inspection mainly include the following aspects:
Appearance quality: The appearance quality of H-shaped steel should comply with relevant standards and ordering requirements. The surface should be smooth and flat, without obvious dents, scratches, rust and other defects.
Geometric dimensions: The length, width, height, web thickness, flange thickness and other dimensions of H-shaped steel should comply with relevant standards and ordering requirements.
Curvature: The curvature of H-shaped steel should comply with relevant standards and ordering requirements. It can be detected by measuring whether the planes at both ends of the H-shaped steel are parallel or using a bending meter.
Twist: The twist of H-shaped steel should comply with relevant standards and ordering requirements. It can be detected by measuring whether the side of the H-shaped steel is vertical or with a twist meter.
Weight deviation: The weight of H-shaped steel should comply with relevant standards and ordering requirements. Weight deviations can be detected by weighing.
Chemical composition: If H-shaped steel needs to be welded or otherwise processed, its chemical composition should comply with relevant standards and ordering requirements.
Mechanical properties: The mechanical properties of H-shaped steel should comply with relevant standards and ordering requirements, including tensile strength, yield point, elongation and other indicators.
Non-destructive testing: If H-shaped steel requires non-destructive testing, it should be tested in accordance with relevant standards and ordering requirements to ensure that its internal quality is good.
Packaging and marking: The packaging and marking of H-shaped steel should comply with relevant standards and ordering requirements to facilitate transportation and storage.
In short, the above requirements should be fully considered when inspecting H-shaped steel to ensure that its quality meets relevant standards and ordering requirements, and to provide users with the best H-shaped steel products.
PRODUCT APPLICATION
External standard H-beams are widely used in the construction and engineering fields, including but not limited to the following aspects:
Structural engineering, bridge engineering, machinery manufacturing, shipbuilding, steel structure construction,
PACKAGING AND SHIPPING
Packaging and transportation of external standard H-beams usually require following the following steps:
Packaging: H-shaped steel is usually packaged according to customer requirements to protect its surface from damage. Common packaging methods include bare packaging, wooden pallet packaging, plastic packaging, etc. When packaging, it is necessary to ensure that the surface of the H-shaped steel is not scratched or corroded.
Labeling: Mark clear product information on the packaging, such as model, specification, quantity, etc., to facilitate identification and management.
Loading: When loading and transporting the packaged H-shaped steel, it is necessary to ensure that there will be no collision or extrusion during the loading process to avoid product damage.
Transportation: Choose appropriate transportation tools, such as trucks, railway transportation, etc., and choose the appropriate transportation method according to customer requirements and transportation distance.
Unloading: After arriving at the destination, unloading operation needs to be done carefully to avoid damage to the H-shaped steel.
Storage: Store H-shaped steel in a dry and ventilated warehouse to avoid moisture or other adverse effects.
COMPANY STRENGTH
FAQ
1.How can I get a quotation from you ?
You can leave us message, and we will reply every message in time.
2.Will you delivery the goods on time?
Yes,we promise to provide best quality products and delivery on time. Honesty is our company's tenet.
3.Can I get samples before order ?
Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.
4.What is your payment terms?
Our usual payment term is 30% deposit, and rest against B/L. EXW, FOB,CFR, CIF.
5.Do you accept the third party inspection?
Yes absolutely we accept.
6.How do we trust your company?
We specialise in steel business for years as golden supplier, headquarter locates in Tianjin province, welcome to investigate in any ways, by all means.
