200x100x5.5×8 150x150x7x10 125×125 ASTM H-Shaped Steel Carbon Steel Profile H Beam

Short Description:

ASTM H-Shaped Steel is a kind of efficient section of economic structure, which needs to be optimized for effective section area and distribution problems and has a more scientific and reasonable strength-to-weight ratio. It is named because its section is the same as the English letter “H”.

Standard: ASTM

Grade: ASTMA36, ASTMA572

Flange Thickness: 4.5-35mm

Flange Width: 100-1000mm

Length: 5.8m, 6m, 9m, 11.8m, 12m or as your requirement

Delivery Term: FOB CIF CFR EX-W

Contact Us: +86 15320016383

: chinaroyalsteel@163.com

Send email to us WhatsApp

Product Detail

Product Tags

Because all parts of Beam H are arranged at right angles, I-beam steel has strong resistance to bending in all directions, simple structure, light weight, constructability and cost, etc., it has been widely used.

PRODUCT PRODUCTION PROCESS

1. Preliminary preparation: including raw material procurement, quality inspection and material preparation. The raw material is usually molten iron produced from high-quality graphitization furnace steelmaking or electric furnace steelmaking, which is put into production after quality inspection.

2. Smelting: Pour the molten iron into the converter and add appropriate returned steel or pig iron for steelmaking. During the steelmaking process, the carbon content and temperature of the molten steel are controlled by adjusting the dosage of graphitizing agent and blowing oxygen in the furnace.

3. Continuous casting billet: The steelmaking billet is poured into the continuous casting machine, and the flowing water from the continuous casting machine is injected into the crystallizer, allowing the molten steel to gradually solidify to form a billet.

4. Hot rolling: The continuous casting billet is hot rolled through the hot rolling unit to make it reach the specified size and geometric shape.

5. Finish rolling: The hot-rolled billet is finished rolled, and the size and shape of the billet are made more accurate by adjusting the rolling mill parameters and controlling the rolling force.

6. Cooling: The finished steel is cooled to reduce the temperature and fix the dimensions and properties.

7. Quality inspection and packaging: Quality inspection of finished products and packaging according to size and quantity requirements.

PRODUCT SIZE

SPECIFICATIONS FOR H-BEAM
1. Size	1) Thickness:5-34mm or customized
	2)Length:6-12m
	3)Web Thickness:6mm-16mm
2. Standard:	JIS ASTM DIN EN GB
3.Material	Q195 Q235 Q345 A36 S235JR S335JR
4. Location of our factory	Tianjin,China
5. Usage:	1)industrial high-rise building
	2)Buildings in Earthquake Prone Areas
	3)large bridges with long spans
6. Coating:	1) Bared 2) Black Painted (varnish coating) 3) galvanized
7. Technique:	hot rolled
8. Type:	H type sheet pile
9. Section Shape:	H
10. Inspection:	Client inspection or inspection by 3rd party.
11. Delivery:	Container, Bulk Vessel.
12. About Our Quality:	1) No damage, no bent 2) Free for oiled&marking 3) All goods can be checked by third party inspection before shipment

Divis ibn (depth x idth	Unit Weight kg/m)	Sandard Sectional Dimension (mm)					Secional Area cm²
Divis ibn (depth x idth	W	H	B	1	2	r	A
HP8x8	53.5	203.7	207.1	11.3	11.3	10.2	68.16
HP10x10	62.6	246.4	255.9	10.5	10.7	t2.7	70.77
HP10x10	85.3	253.7	259.7	14.4	14.4	127	108.6
HP12x12	78.3	2992	305.9	11.0	11.0	15.2	99.77
	93.4	303.3	308.0	13.1	13.1	15.2	119.0
	111	308.1	310.3	15.4	15.5	15.2	140.8
	125	311.9	312.3	17.4	17.4	15.2	158.9
HP14x14%	108.0	345.7	370.5	12.8	t2.8	15.2	137.8
	132.0	351.3	373.3	15.6	15.6	15.2	168.4
	152.0	355.9	375.5	17.9	17.9	15.2	193.7
	174.0	360.9	378.1	20.4	20.4	15.2	221.5

FEATURES

H Beam 100x100 can be mainly used for the development of beams and columns in industrial and civil building structures.
Steel bearing bracket Industrial structure.Steel piles and supporting structures Underground works Petrochemical and electric power and other industrial production equipment structure Large span steel bridge components Ship, machinery manufacturing frame structure Train, car, tractor beam bracket The port is supported by conveyor belt and high-speed baffleWhen it comes to supporting heavy loads, H Beam Pile undoubtedly stands out in the competition. The structural steel H beam exhibits remarkable strength properties, making it an ideal choice for projects where load-bearing capacity is of utmost importance. Additionally, the use of hot rolled steel in the manufacturing process enhances the overall durability and resilience of these beams, making them highly resistant to warping, twisting, and corrosion.

PROJECT

Our company has many years of experience in foreign trade of Hot Rolled Steel H Beam. The total amount of H-beams exported to Canada this time is more than 8,000,000 tons. The customer will inspect the goods in the factory. Once the goods pass the inspection, payment will be made and shipped. Since the construction of this project started, our company has carefully arranged the production plan and compiled the process flow to ensure the timely delivery of the H-shaped steel project. Since it is used in large factory buildings, the performance requirements for H-shaped steel products are higher than the corrosion resistance of oil platform H-shaped steel. Therefore, our company starts from the source of production and increases the control of steelmaking, continuous casting and rolling related processes. Strengthen the quality of products of various specifications to be effectively controlled in all aspects, ensuring a 100% pass rate of finished products. In the end, the processing quality of H-shaped steel was unanimously recognized by customers, and long-term cooperation and mutual benefit were achieved on the basis of mutual trust.

PRODUCT INSPECTION

The requirements for H-shaped steel inspection mainly include the following aspects:
Appearance quality: The appearance quality of H-shaped steel should comply with relevant standards and ordering requirements. The surface should be smooth and flat, without obvious dents, scratches, rust and other defects.
Geometric dimensions: The length, width, height, web thickness, flange thickness and other dimensions of H-shaped steel should comply with relevant standards and ordering requirements.
Curvature: The curvature of H-shaped steel should comply with relevant standards and ordering requirements. It can be detected by measuring whether the planes at both ends of the H-shaped steel are parallel or using a bending meter.
Twist: The twist of H-shaped steel should comply with relevant standards and ordering requirements. It can be detected by measuring whether the side of the H-shaped steel is vertical or with a twist meter.
Weight deviation: The weight of H-shaped steel should comply with relevant standards and ordering requirements. Weight deviations can be detected by weighing.
Chemical composition: If H-shaped steel needs to be welded or otherwise processed, its chemical composition should comply with relevant standards and ordering requirements.
Mechanical properties: The mechanical properties of H-shaped steel should comply with relevant standards and ordering requirements, including tensile strength, yield point, elongation and other indicators.
Non-destructive testing: If H-shaped steel requires non-destructive testing, it should be tested in accordance with relevant standards and ordering requirements to ensure that its internal quality is good.
Packaging and marking: The packaging and marking of H-shaped steel should comply with relevant standards and ordering requirements to facilitate transportation and storage.
In short, the above requirements should be fully considered when inspecting H-shaped steel to ensure that its quality meets relevant standards and ordering requirements, and to provide users with the best H-shaped steel products.

APPLICATION

H section beams are also widely used in the shipbuilding industry, where their superior load-bearing capacity and resistance to corrosion make them ideal for constructing various marine structures. Moreover, modern architectural designs often employ H section beams as aesthetically pleasing design elements, adding an industrial touch to contemporary structures.

PACKAGING AND SHIPPING

Before shipping, ensure that the H-shaped steel is properly packed and secured to prevent movement or collision during transportation. Appropriate packaging materials and fixtures, such as steel belts, cushion wood, etc. can be used to ensure the stability and safety of H-shaped steel.

According to the size, weight and transportation distance of H-shaped steel and other factors, choose the appropriate transportation mode. For short distance transport, road transport can be selected, using trucks or other road transport; For long-distance transportation, rail transportation may be more suitable because it can carry a large number of H-beams and is more stable; If international trade or long-distance sea transport is required, water transport may be a good option; In case of emergency or high time requirements, you can choose to transport by air.

COMPANY STRENGTH

Made in China, first-class service, cutting-edge quality, world-renowned
1. Scale effect: Our company has a large supply chain and a large steel factory, achieving scale effects in transportation and procurement, and becoming a steel company that integrates production and services
2. Product diversity: Product diversity, any steel you want can be purchased from us, mainly engaged in steel structures, steel rails, steel sheet piles, photovoltaic brackets, channel steel, silicon steel coils and other products, which makes it more flexible Choose the desired product type to meet different needs.
3. Stable supply: Having a more stable production line and supply chain can provide more reliable supply. This is especially important for buyers who require large quantities of steel.
4. Brand influence: Have higher brand influence and larger market
5. Service: A large steel company that integrates customization, transportation and production
6. Price competitiveness: reasonable price

*Send the email to chinaroyalsteel@163.com to get a quotation for your projects

FAQ

1.How can I get a quotation from you ?
You can leave us message, and we will reply every message in time.

2.Will you delivery the goods on time?
Yes,we promise to provide best quality products and delivery on time. Honesty is our company's tenet.

3.Can I get samples before order ?
Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.

4.What is your payment terms?
Our usual payment term is 30% deposit, and rest against B/L. EXW, FOB,CFR, CIF.

5.Do you accept the third party inspection?
Yes absolutely we accept.

6.How do we trust your company?
We specialise in steel business for years as golden supplier, headquarter locates in Tianjin province, welcome to investigate in any ways, by all means.

Previous: Best Sale Light Weight Steel Structure For House Prefabricated Steel Workshop Steel Structures Building

Next: ASTM H-Shaped Steel Structural Steel Beams Standard Size h Beam Price Per Ton

Beam H